Simrad SP270 Instrukcja Instalacji Pobierz pdf (Strona 54)

Simrad SP270

851-160572 / B

Min. 10mm

internal

3/8" pipe

thread

Open position

(CD1889 WMF/GIF)

Figure 7 The air bleeding cock

Staying

The Hull Unit is constructed to be in the lower position with a

maximum speed of 15 knots. To prevent unwanted vibrations,

the Hull Unit has to be stayed off against the bulkhead. Remove

the lifting rings on the top of the gallows on the Hull Unit and

use the holes for fastening of the staying in the fore-and-aft

direction. In case of service on the Hull Unit, it should be

possible to remove the staying.

Alignment of the transducer

Note that the transducer should not be mechanically aligned

even if the Hull Unit is oriented differently from figure 6.

The transducer alignment will be carried out later by turning the

echo picture in the computer.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 253 254

Brak uwag

Simrad SP270 Instrukcja Instalacji Strona 54