Simrad NSO-II Dokumentacja Pobierz pdf (Strona 86)

86 |

Video | NSO-II Operator Manual

facing cameras used to back-down the vessel.

Video standard

NSO-II supports NTSC and PAL video. The two channels are set up individually. Check the

local video standard or the standard of your cameras.

FLIR camera control

If a FLIR camera is available on the Ethernet network, you can display the video and

control the camera from the NSO-II.

A video panel can be set up as a single panel, or as one of the panels on a multiple panel

page.

Establishing connection with the FLIR video camera

When a video panel is active, the NSO-II will automatically recognize a Flir camera if this is

available on the network.

¼ Note: When there is DHCP server present on the Ethernet network, FLIR camera will need

to be congured and set to have Static IP Address before the connection can be estab-

lished. For instructions on how to congure your specic FLIR camera model please refer

to FLIR documentation.

¼ Note: Only one FLIR camera can be connected to the Ethernet network at a time.

When you activate a video panel, the system will start searching the network for a FLIR

camera.

If the connection later is lost, this will be indicated by a panel key. Tap this key to re-

establish the connection.

When the connection is established the menu will change to include access to FLIR

camera control.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 113 114

Brak uwag

Simrad NSO-II Dokumentacja Strona 86